PHOTONIX TECHNOLOGIES PX-C202 REPAIR and PHOTONIX TECHNOLOGIES PX-C202 CALIBRATION
 
Custom-Cal has a high success rate in the repair of the PHOTONIX TECHNOLOGIES PX-C202. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the PHOTONIX TECHNOLOGIES PX-C202 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Laser Source (DFB-LD-WDM-BBS)?
Shop for Comparable Products on our  used Laser Source (DFB-LD-WDM-BBS) page or new Laser Source (DFB-LD-WDM-BBS) page

 
   PHOTONIX TECHNOLOGIES PX-C202   Description / Specification:    
PHOTONIX TECHNOLOGIES PX-C202 850/1300 nm Dual LED Light Source

The Photonix PX-C202 Techlite is a Dual LED Light Source that allows technicians to perform precise optical loss measurements in the field. The sources provide the stable light output required by optical power meters to determine power loss in fiber, connectors, attenuators, or other passive optical components. The Photonix PX-C202 Techlite sources with output wavelengths of 850nm and 1300nm LED, which has a modulated output at 30Hz, 500Hz, and 2kHz. This allows them to be used as tracer signal generators for use with most popular fiber identifiers or optical leak detection probes.
Specifications.

Wavelength: 850 ±20 nm / 1300 ±50 nm.
Humidity: 10% to 90% non-condensing.
Power output: -17dBm into 62.5.
Stability: ±.05/.08 dB/8hr.
Bandwidth (max): 60/200 nm.
Trickle Charge:12-14 hrs.
Operating Temperature: -5°C to 45°C.
Storage temperature: -10°C to 60°C.



 



Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBm
Optical power referenced to 1 millimatt

Multimode Fiber
Multimode Fiber has a large core (almost always 62.5 microns - a micron is one one millionth of a meter - but sometimes 50 microns) and is used with LED sources at wavelengths of 850 and 1300 nm for short distance, lower speed networks like LANs. Both multimode and singlemode fiber have an outside diameter of 125 microns - about 5 thousandths of an inch - just slightly larger than a human hair.

Power Repeatability
Power Repeatability is the random uncertainty in reproducing the power level after changing and re-setting the power level. The power repeatability is ± half the span (in dB) between the highest and lowest actual power. Note: - The long-term power repeatability can be obtained by taken the power repeatability and power stability into account.

Refractive Index
The refractive index or index of refraction of a substance is a measure of the speed of light in that substance. It is expressed as a ratio of the speed of light in vacuum relative to that in the considered medium. The velocity at which light travels in vacuum is a physical constant, and the fastest speed at which energy or information can be transferred. However, light travels slower through any given material, or medium, that is not vacuum.

Total insertion loss
A measure of the loss of light within an optical component


Please contact us for your PHOTONIX TECHNOLOGIES PX-C202 REPAIR and/or PHOTONIX TECHNOLOGIES PX-C202 850/1300 nm Dual LED Light Source CALIBRATION
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: